[cabf_validation] [外部郵件] Re: FW: Improving 3.2.2.4.1 - draft text for VWG

Tim Hollebeek tim.hollebeek at digicert.com
Thu Jan 18 10:02:37 MST 2018


We should set the “People can join before the meeting has started” flag on the meeting.  It’s often 2-3 minutes before the host dials in.

 

-Tim

 

From: realsky(CHT) [mailto:realsky at cht.com.tw] 
Sent: Thursday, January 18, 2018 9:07 AM
To: Rick Andrews <rick.andrews at digicert.com>; CA/Browser Forum Validation WG List <validation at cabforum.org>
Cc: Tim Hollebeek <tim.hollebeek at digicert.com>
Subject: Re: [外部郵件] Re: [cabf_validation] FW: Improving 3.2.2.4.1 - draft text for VWG

 

    I also face the same situation. The information in https://www.cabforum.org/wiki/Teleconference%20numbers can't work. 

 

           Li-Chun Chen

 

 


-----Original message-----
From:Rick Andrews via Validation<validation at cabforum.org <mailto:validation at cabforum.org> >
To:Tim Hollebeek<tim.hollebeek at digicert.com <mailto:tim.hollebeek at digicert.com> >,CA/Browser Forum Validation WG List<validation at cabforum.org <mailto:validation at cabforum.org> >
Date: Fri, 19 Jan 2018 00:03:22
Subject: [外部郵件] Re: [cabf_validation] FW: Improving 3.2.2.4.1 - draft text for VWG
Webex is saying the meeting number isn’t valid or the meeting hasn’t started yet. 

-Rick


On Jan 18, 2018, at 7:13 AM, Tim Hollebeek via Validation <validation at cabforum.org <mailto:validation at cabforum.org> > wrote:

 

 

From: Mads Egil Henriksveen [mailto:Mads.Henriksveen at buypass.no] 
Sent: Thursday, January 18, 2018 8:12 AM
To: Tim Hollebeek <tim.hollebeek at digicert.com <mailto:tim.hollebeek at digicert.com> >
Subject: Improving 3.2.2.4.1 - draft text for VWG

 

Hi Tim

 

I have been working on some text together with Entrust and Globalsign to improve 3.2.2.4.1 – find draft below. 

 

In addition to this text, we will include some definitions from EVG (QGIS, QTIS, QIIS) and we are working on some changes to 3.2.5 as well.

 

Can I ask you to distribute this to the VWG for today’s call - to get some initial reactions? I am not a member of the VWG, but will try to join the meeting today. 

 

Regards

Mads 

 

3.2.2.4.1 Validating the Applicant as a Domain Name Registrant

Conforming the Applicant's control over the FQDN by validating the Applicant as the Domain Name Registrant by verifying that: 

1.     The name of the Domain Name Registrant substantially matches the Applicant’s name AND

2.     Additional information about the Domain Name Registrant in the WHOIS meet the following requirements:

i.	The Registrant’s postal address in the WHOIS belongs to the Applicant. CAs MUST verify this by matching it with one of the Applicant's addresses in: (a) a QGIS, QTIS, or QIIS; or (b) a Verified Professional Letter. 
Note: Address details in the WHOIS are required to use this option. Address details must include at a minimum the Country and either Locality, State or Province. OR 
ii.	The WHOIS contains the Registration (or similar) Number assigned to the Applicant by the Incorporating or Registration Agency in its Jurisdiction of Incorporation or Registration as appropriate. CAs MUST verify this by matching the Registration Number in the WHOIS with the Applicant’s Registration Number in a QGIS or a QTIS. 

Additionally, this method may only be used if: 

1. The CA authenticates the Applicant's identity under BR Section 3.2.2.1 and the authority of the Applicant Representative under BR Section 3.2.5, OR

2. The CA authenticates the Applicant's identity under EV Guidelines Section 11.2 and the agency of the Certificate Approver under EV Guidelines Section 11.8; OR 

3. The CA is also the Domain Name Registrar, or an Affiliate of the Registrar, of the Base Domain Name. 

 

Note: Once the FQDN has been validated using this method, the CA MAY also issue Certificates for other FQDNs that end with all the labels of the validated FQDN. This method is suitable for validating Wildcard Domain Names.

 

This revised version of BR 3.2.2.4.1 shall apply to domain validations occurring on or after June 1, 2018.

 

_______________________________________________
Validation mailing list
Validation at cabforum.org <mailto:Validation at cabforum.org> 
https://cabforum.org/mailman/listinfo/validation

_______________________________________________
Validation mailing list
Validation at cabforum.org <mailto:Validation at cabforum.org> 
https://cabforum.org/mailman/listinfo/validation

 

本信件可能包含中華電信股份有限公司機密資訊,非指定之收件者,請勿蒐集、處理或利用本信件內容,並請銷毀此信件. 如為指定收件者,應確實保護郵件中本公司之營業機密及個人資料,不得任意傳佈或揭露,並應自行確認本郵件之附檔與超連結之安全性,以共同善盡資訊安全與個資保護責任. 

Please be advised that this email message (including any attachments) contains confidential information and may be legally privileged. If you are not the intended recipient, please destroy this message and all attachments from your system and do not further collect, process, or use them. Chunghwa Telecom and all its subsidiaries and associated companies shall not be liable for the improper or incomplete transmission of the information contained in this email nor for any delay in its receipt or damage to your system. If you are the intended recipient, please protect the confidential and/or personal information contained in this email with due care. Any unauthorized use, disclosure or distribution of this message in whole or in part is strictly prohibited. Also, please self-inspect attachments and hyperlinks contained in this email to ensure the information security and to protect personal information.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cabforum.org/pipermail/validation/attachments/20180118/100f1cba/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4940 bytes
Desc: not available
URL: <http://cabforum.org/pipermail/validation/attachments/20180118/100f1cba/attachment-0001.p7s>


More information about the Validation mailing list