[Servercert-wg] [cabfpub] Ballot SC3: Improvements to Network Security Guidelines
Doug Beattie
doug.beattie at globalsign.com
Fri Jul 13 04:33:54 MST 2018
I completely understand the requirement to have a maximum period for password use (everyone has one today), but I’m having a hard time with a requirement that says you can’t have a policy for changing your password more frequently than X. This could conflict with other audit requirements and local corporate policies where rotating passwords is needed. Personally, I don’t think we should have a requirement (MUST statement) regarding the minimum amount of time between password changes.
I recommend removing this from the ballot:
Effective April 1, 2020, if passwords are required to be changed periodically, that period SHALL NOT be less than two years."
Doug
From: Servercert-wg <servercert-wg-bounces at cabforum.org> On Behalf Of Wayne Thayer via Servercert-wg
Sent: Thursday, July 12, 2018 7:35 PM
To: Tim Hollebeek <tim.hollebeek at digicert.com>; CA/Browser Forum Public Discussion List <public at cabforum.org>
Cc: servercert-wg at cabforum.org
Subject: Re: [Servercert-wg] [cabfpub] Ballot SC3: Improvements to Network Security Guidelines
How are the concerns that were raised by Microsoft (copied below for reference) addressed in this version? If the intent is for the language in section 2.g(iv) to only apply to periodic, policy-driven password changes and not to prevent event-driven changes, I think that should be clarified.
* How would auditors verify and prove that a CA did not change a password more frequently than two years? This is trying to prove a negative.
* What about when a CA employee leaves who knows the password which requires it to be change in less than two years?
* What about if the password is compromised and needs to be changed in less than two years?
- Wayne
On Thu, Jul 12, 2018 at 8:51 AM Tim Hollebeek via Public <public at cabforum.org <mailto:public at cabforum.org> > wrote:
Adding the public list as discussed on the call.
-Tim
From: Servercert-wg [mailto:servercert-wg-bounces at cabforum.org <mailto:servercert-wg-bounces at cabforum.org> ] On Behalf Of Adriano Santoni via Servercert-wg
Sent: Thursday, July 12, 2018 1:53 AM
To: servercert-wg at cabforum.org <mailto:servercert-wg at cabforum.org>
Subject: Re: [Servercert-wg] Ballot SC3: Improvements to Network Security Guidelines
Let's try again....
Il 11/07/2018 19:44, Dimitris Zacharopoulos ha scritto:
Are all members who have declared participation to this WG, able to post to this list without moderation?
Dimitris.
On 10/7/2018 12:44 πμ, Tim Hollebeek wrote:
TL;DR: Ballot SC3 is exactly the same as Ballot 221, the only changes are to include a redline, and to make the requirements around password lifetimes a bit easier to read.
-Tim
From: Servercert-wg [mailto:servercert-wg-bounces at cabforum.org] On Behalf Of Tim Hollebeek
Sent: Monday, July 9, 2018 5:05 PM
To: servercert-wg at cabforum.org <mailto:servercert-wg at cabforum.org>
Subject: [Servercert-wg] Ballot SC3: Improvements to Network Security Guidelines
https://github.com/cabforum/documents/compare/SC3-PasswordChangesDieDieDie?expand=1
Ballot 221: Two-Factor Authentication and Password Improvements
Purpose of Ballot: The Network Security Working Group met a number of times to
improve the Network Security Guidelines requirements around authentication,
specifically by requiring two-factor authentication, and improving the password
requirements in line with more recent NIST guidelines.
While CAs are encouraged to improve their password requirements as soon as
possible, a two year grace period is being given to allow organizations to
develop and implement policies to implement the improved requirements, especially
since some organizations may have to simultaneously comply with other
compliance frameworks that have not been updated yet and are based on older NIST
guidance about passwords.
The following motion has been proposed by Tim Hollebeek of DigiCert and endorsed
by Dimitris Zacharopoulos of Harica and Neil Dunbar of TrustCor.
— MOTION BEGINS –
This ballot modifies the “Network and Certificate System Security Requirements”
as follows, based upon Version 1.1:
In the definitions, add a definition for Multi-Factor Authentication:
"Multi-Factor Authentication: An authentication mechanism consisting of two or
more of the following independent categories of credentials (i.e. factors) to
verify the user’s identity for a login or other transaction: something you know
(knowledge factor), something you have (possession factor), and something you
are (inherence factor). Each factor must be independent. Certificate-based
authentication can be used as part of Multifactor Authentication only if the
private key is stored in a Secure Key Storage Device."
Capitalize all instances of the defined term "Multi-Factor Authentication".
Add a definition for Secure Key Storage Device:
"Secure Key Storage Device: A device certified as meeting at least FIPS 140-2
level 2 overall, level 3 physical, or Common Criteria (EAL 4+)."
In section 1.j., capitalize Multi-Factor Authentication, and strike the
parenthetical reference to subsection 2.n.(ii).
In section 2.f., add "(for accountability purposes, group accounts or shared
role credentials SHALL NOT be used)" after "authenticate to Certificate Systems".
Change section 2.g. to read:
"g. If an authentication control used by a Trusted Role is a username and password,
then, where technically feasible, implement the following controls:
i. For accounts that are accessible only within Secure Zones or High Security
Zones, require that passwords have at least twelve (12) characters;
ii. For authentications which cross a zone boundary into a Secure Zone or High
Security Zone, require Multi-Factor Authentication. For accounts accessible
from outside a Secure Zone or High Security Zone require passwords that have
at least eight (8) characters and are not be one of the user's previous
four (4) passwords; and implement account lockout for failed access attempts
in accordance with subsection k;
iii. When developing password policies, CAs SHOULD take into account the password
guidance in NIST 800-63B Appendix A.
iv. Frequent password changes have been shown to cause users to select less
secure passwords. If passwords are required to be changed periodically,
that period SHOULD NOT be less than two years. Effective April 1, 2020,
if passwords are required to be changed periodically, that period SHALL NOT
be less than two years."
In section 2.h., change "Require" to "Have a policy that requires"
In section 2.i., change "Configure" to "Have a procedure to configure"
Change section 2.k. to read:
"k. Lockout account access to Certificate Systems after no more than five (5) failed
access attempts, provided that this security measure:
i. is supported by the Certificate System,
ii. Cannot be leveraged for a denial of service attack, and
iii. does not weaken the security of this authentication control;"
Change section 2.n. to read:
"Enforce Multi-Factor Authentication for all Trusted Role accounts on Certificate
Systems (including those approving the issuance of a Certificate, which equally
applies to Delegated Third Parties) that are accessible from outside a Secure Zone
or High Security Zone; and"
— MOTION ENDS –
The procedure for approval of this ballot is as follows:
Discussion (7+ days)
Start Time: 2018-07-09 17:00:00 EST
End Time: not before 2018-07-16 17:00:00 EST
Vote for approval (7 days)
Start Time: TBD
End Time: TBD
_______________________________________________
Servercert-wg mailing list
Servercert-wg at cabforum.org <mailto:Servercert-wg at cabforum.org>
http://cabforum.org/mailman/listinfo/servercert-wg
_______________________________________________
Servercert-wg mailing list
Servercert-wg at cabforum.org <mailto:Servercert-wg at cabforum.org>
http://cabforum.org/mailman/listinfo/servercert-wg
_______________________________________________
Public mailing list
Public at cabforum.org <mailto:Public at cabforum.org>
https://cabforum.org/mailman/listinfo/public
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cabforum.org/pipermail/servercert-wg/attachments/20180713/93549842/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5736 bytes
Desc: not available
URL: <http://cabforum.org/pipermail/servercert-wg/attachments/20180713/93549842/attachment-0001.p7s>
More information about the Servercert-wg
mailing list